Lotul nr. 1 Blanchete de pașaport / documente de călătorie (format TD 3)

17 iun 2024, 12:11

Procurement notice Qualification and selection criteria (description of the criterion/requirement / ESPD/DUAE)

Point 18: Data from the Registry of Forensic and Criminological Information in the country of origin Please clarify if we understand the right way: If according to the national law of the State in which the Bidder is established, the clarification criteria can be confirmed by a sworn statement before a public notary, made by the person who has the right the represent the bidder and for the signature of the tender documentation, we do not need to present data from the Registry if forensic and terminological information for company directors or any other person with the power of representation, decision or control over the candidate, but it is enough if we present the sworn statement / self-declaration.

19 iun 2024, 11:06

garantie de participare

Va rugam sa ne comunicati daca Garantia de participare se poate constitui pentru ambele loturi cu acelasi instrument bancar (ex. ordin de plata, scrisoare de garantie bancara) sau trebuie constituita in mod distinct pentru fiecare lot.

19 iun 2024, 11:09

licitatie electronica

Va rugam sa ne comunicati care este modalitatea de desfasurare a etapelor de licitatie electronica. Oferta trebuie imbunatatita cu procentul de minim 1% in fiecare etapa sau doar per total? Daca la primele doua etape de licitatie electronica nu se imbunatateste oferta, se poate participa la ultima etapa de licitatie electronica?

19 iun 2024, 13:38

Anexa 24-contract model

Referitor la Contractul model prezentat in Anexa 24 va adresam rugamintea de a analiza urmatoarele: 1. Va rugam sa introduceti clauze pentru acordarea ,,Bunului de tipar" de catre comparator, pe machetele produselor de urmeaza a fi tiparite. 2. Avand in vedere perioada de valabilitate a contractului de 4 ani, exista posibilitatea ajustarii pretului in perioada de derulare a contractului ? 3. Avand in vedere ca in contract se mentioneaza ca, in situatia in care sunt constatate neconformitati, compensarea cheltuielilor pentru bunurile neconforme se va face ce catre furnizor in cinci zile, exista posibilitatea ca inainte de compensarea cheltuielilor Furnizorul sa inlocuiasca produsele neconforme ? 4. Cu privire la penalitati, va rgam sa analizati posibilitatea ca acestea sa fie puse in oglinda ca procente atat pentru furnizor cat si pentru cumparator.

20 iun 2024, 12:38

Supporting documents for ESPD/DUAE

According to ESPD / DUAR form, Chapter V. General guidelines for qualification and selection criteria, point 5.A.1. Is the economic operator able to submit to the Automated Information System “State Register of Public Procurement” or by electronic means, or if necessary, on paper to the contracting authority: forms, certificates, notices and other documents indicated by the contracting authority/ contracting entity in the Procurement notice and Standard documentation? Deadline 7 calendar days from the date of request Please clarify if all the documents listed in the Procurement Notice ( documents listed under points 1- 20 ) need to be submitted with the offer or if some of these documents are considered supporting documents for the ESPD / DUAE form and need to be submitted only on request from the Contracting Authority within a term of up to 7 days.

20 iun 2024, 17:09

Clarifications

Please be so kind and confirm that the last day to ask for clarification is 24. June ( till the end of the day ). Thank you.

24 iun 2024, 15:17

Technical specification

1) “7 .1.1.2 The cardbody shall be made out from PC in a multilayer security structure, technologically assembled, with a thickness not exceeding 0,76 mm and rounded corners at the outer edges (radius 3, l 8±0,30mm). Note: Manufacturer shall provide to Beneficiary the information on the number of layers of the PC card, which must not be less than 6 layers.” We would like to ask PSA to allow the bidders to recommend different multi-layer structure and thickness of the polycarbonate data page, keeping the requirement of security features and the high-quality of the products.

24 iun 2024, 15:17

Technical specification

2) “7.1.1.3 The hinge, made out of synthetic material, shall be partially inserted in a PC security card body.” We would like to ask PSA to allow the bidders to recommend a fully inserted hinge in the polycarbonate data page instead of the partially inserted one, thus this way the polycarbonate data page will own a better result in tensile strength, furthermore, it does not have any disadvantageous attribute nor on the graphics, nor on the quality of the product.

24 iun 2024, 15:19

Technical specification

3) “The hinge shall be secured with enough security features of the level 1 (inspected without equipment) and level 2 (inspected with simple equipment), allowing its easy/instant identification and preventing the card body removing and/or replacement, namely: UV fluorescent inks/IR inks and/or other features embedded in the material; design features precisely aligned in a certain sequence etc.” Please allow to change the requirement of level 2 security feature of the hinge. It does not have a significant effect on the security of the product, thus, we would like to recommend other, additional security feature in the booklet (level 2 or level 3), which would protect the document with higher security.

24 iun 2024, 15:20

Technical specification

As stated in the technical specification, the passport products differ in the color of the cover. Is there any other part which shall be different? For example, the color of the inside cover page, visa pages, data page, differences in design, serial numbering, etc.

24 iun 2024, 15:20

Technical specification

“7.1.2.1. e) transparent window with color changing effect (transparent area will change color according to the color of the background on which it is viewed, using technology whereby the material used will have the effect of optical change):” Is there any specific requirement regarding the shape of the transparent window, or the bidders can recommend?

24 iun 2024, 15:21

Technical specification

“6.7 The serial number of the passport shall be applied: - to the bottom on the inside front cover - letterpress printing;” We would like to ask PSA to allow the bidders to recommend placing the letterpress numbering on the first page following the polycarbonate data page (first paper-based page). It is recommended from several points of view, like personalization, verification and technological points. On the other hand, the general production practice of the passports justifies this method of serial numbering.

24 iun 2024, 15:22

Technical specifications

“9.2 The passport booklet shall have a certificate issued by an independent accredited Iaboratory on passing the tests on physical, electrical, LDS and PKI objects according to the following methods:” Please specify when the mentioned test report shall be presented.

24 iun 2024, 15:23

Delivery times / contract

“1. The Buyer shall submit the Design projects of the Goods to the Supplier and provide support and advice in their usage. The transmission of the Design projects to the Supplier is carried out by drawing up an Act of delivery-receipt signed by both Parties. The Design projects for Lot No.1 will be submitted in Quarter 1 of 2025, and for Lot No.2 within 5 (five) calendar days from the contract signature date. 2. Within 60 calendar days from the signing of the Act of delivery-receipt of Design projects, the Supplier shall ensure the adaptation of the Design and the adjustment of the color range, the printing approval and the production of 5 (five) assembled models for each type of blank. Every step will be coordinated and approved by the Buyer. 3. Within 30 calendar days from the Buyer’s final approval of the assembled Blank models, the Supplier is obliged to produce and deliver to the Buyer, free of charge, Blank-specimens for technological needs according to the Delivery Plan. At the same time, the Supplier shall transmit to the Buyer the Design of the Goods, developed in digital format (PDF format, on electronic support), which contains graphic information (vector and high-quality raster in the corresponding layers).” a) Please provide the definition of “Design projects of the Goods”, and what steps it includes. b) Depending on the response for the previous question, and the exact date of signing of the contract, the given time for the preparation for the production of the passport is significantly short. Thus the contract shall be signed at least 6-7 months before the sample production of the passport booklets, due to the design preparation phase, raw material preparation, acceptance and order. For this reason, we would like to recommend to modify the requirement according to the above-mentioned time frame. This way, this condition is a significant advantage of the current provider, but other companies would also have the chance to provide a competitive offer in time.

24 iun 2024, 15:26

Technical specifications/design

6.6 The following stages shall be carried out for manufacturing the identity card: - drawing up the design of the card (background design, images, text and captions of data fields) - will be carried out by Public Service Agency (PSA);” Please confirm that the Successful Bidder shall prepare the new security design of every document (cards and passports as well) and PSA will provide the requested graphical elements which shall be part of the final design.

1 iul 2024, 10:35

Tender guarantee

Please be so kind as to inform if the tender guarantee must be only electronically submitted by the deadline for the Tender submission, or if the original must also be sent to PSA in physical format. Please also confirm that a bank guarantee issued by financial institutions lawfully operating in any country of the European Union (EU) or of the European Economic Area (EEA) is accepted. Thank you.