1
Enquiry period
with 04.01.2022 09:37
to 26.01.2022 16:45
2
Bidding period
with 26.01.2022 16:45
to 28.02.2022 16:45
3
Auction

4
Evaluation
5
Bids have been evaluated
Status Bids have been evaluated
Estimated value without VAT 394 905 000 MDL
Period of clarifications: 4 Jan 2022, 9:37 - 26 Jan 2022, 16:45
Submission of proposals: 26 Jan 2022, 16:45 - 28 Feb 2022, 16:45
Auction start date: will not be used

Supplier technical support:

(+373) 79999801


This procedure is carried out without auction. Your offer is final and must contain the entire list of required documents.

Conform documentaţiei de atribuire
Information about customer
Fiscal code/IDNO
Address
2012, MOLDOVA, mun.Chişinău, mun.Chişinău, str. Puskin, 42
Web site
---
The contact person
Full name
Victoria Eșanu
Contact phone
022504714
Purchase data
Date created
4 Jan 2022, 9:15
Date modified
13 Jan 2022, 13:36
Estimated value (without VAT)
394 905 000 MDL
Achizitii.md ID
21049600
Type of procedure
Open tender
Award criteria
The lowest price
Delivery address
2012, MOLDOVA, mun.Chişinău, mun.Chişinău, str. Puskin, 42
Contract period
1 Mar 2022 09:27 - 30 Dec 2025 09:32
List of positions
1)
Title
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare CPV: 22400000-4 - Stamps, cheque forms, banknotes, stock certificates, trade advertising material, catalogues and manuals
Quantity: 3165000.0
Unit of measurement: Bucata
Documents of the procurement procedure
declaratie eng.doc
Bidding Documents
-
4.01.22 09:37
declaratie ro.signed.pdf declaratie ro.signed.pdf
Bidding Documents
-
4.01.22 09:37
declaratie eng.signed.pdf declaratie eng.signed.pdf
Bidding Documents
-
4.01.22 09:37
documentatia standard ro.docx
Bidding Documents
-
4.01.22 09:37
declaratie ro.doc
Bidding Documents
-
4.01.22 09:37
modificat_duae ro 13.01.22.docx
Bidding Documents
-
13.01.22 13:36
modificat_duae ro 13.01.22.signed.pdf modificat_duae ro 13.01.22.signed.pdf
Bidding Documents
-
13.01.22 13:36
modificat_duae eng 13.01.2022.signed.pdf modificat_duae eng 13.01.2022.signed.pdf
Bidding Documents
-
13.01.22 13:36
modificat_duae eng 13.01.2022.docx
Bidding Documents
-
13.01.22 13:36
modificat_documentatia standard eng 13 01 2022.docx
Bidding Documents
-
13.01.22 13:36
MODIFICAT_Anunt de participare Eng 01.02.2022.signed.signed.pdf
Bidding Documents
-
2.02.22 11:16
MODIFICAT_Anunt de participare Ro 01.02.2022.signed.signed.pdf
Bidding Documents
-
2.02.22 11:21

The offers of the participants are available below, you can view the documents for the offers by clicking on the folder icon.

Based on the Working Group Decision, the selection of a winner requires:

1) Choose winner by clicking the button "Winner.”

2) Отправить в течении 3 дней на почту AAP bap@tender.gov.md отсканированное решение рабочей группы.

4) After choosing the winner, press the button: "Confirm"..

Qualification
Participant(s) name(s)
Normalized price
Status
1
Participant(s) name(s):

Polska Wytwórnia Papierów Wartościowych S.A.

Normalized price: 130 477 483,02 MDL
Status: Winner
Reason: Motivele sunt expuse in scrisoarea de instiintare.
Qualification documents
Documents provided with the proposal
2
Participant(s) name(s):

Veridos GmbH

Normalized price: 159 698 183,59 MDL
Status: Awaiting

Documents such as "Qualification Documentation", "financial proposal" and "Illustration" will be browseable for all only after your offer has been placed in "pending" status.

Reason: Not indicated
Qualification documents
Documents folder missing
Documents provided with the proposal
3
Participant(s) name(s):

UAB "Garsų pasaulis"

Normalized price: 176 912 645,44 MDL
Status: Awaiting

Documents such as "Qualification Documentation", "financial proposal" and "Illustration" will be browseable for all only after your offer has been placed in "pending" status.

Reason: Not indicated
Qualification documents
Documents folder missing
Documents provided with the proposal
4
Participant(s) name(s):

Mühlbauer ID Services GmbH

Normalized price: 187 043 553,53 MDL
Status: Awaiting
5
Participant(s) name(s):

Thales DIS Finland Oy

Normalized price: 195 509 113,54 MDL
Status: Awaiting

Documents such as "Qualification Documentation", "financial proposal" and "Illustration" will be browseable for all only after your offer has been placed in "pending" status.

Reason: Not indicated
Qualification documents
Documents folder missing
Documents provided with the proposal
6
Participant(s) name(s):

SELP

Normalized price: 246 782 180,43 MDL
Status: Awaiting

Documents such as "Qualification Documentation", "financial proposal" and "Illustration" will be browseable for all only after your offer has been placed in "pending" status.

Reason: Not indicated
Qualification documents
Documents folder missing
Documents provided with the proposal
7
Participant(s) name(s):

DEEPLACE

Normalized price: 260 665 165,22 MDL
Status: Awaiting

Documents such as "Qualification Documentation", "financial proposal" and "Illustration" will be browseable for all only after your offer has been placed in "pending" status.

Reason: Not indicated
Qualification documents
Documents folder missing
Documents provided with the proposal
8
Participant(s) name(s):

ANY Biztonsági Nyomda Nyrt.

Normalized price: 272 415 990,70 MDL
Status: Awaiting

Documents such as "Qualification Documentation", "financial proposal" and "Illustration" will be browseable for all only after your offer has been placed in "pending" status.

Reason: Not indicated
Qualification documents
Documents folder missing
Documents provided with the proposal
9
Participant(s) name(s):

Compania Nationala "Imprimeria Nationala" S.A.

Normalized price: 352 931 646,83 MDL
Status: Awaiting

Documents such as "Qualification Documentation", "financial proposal" and "Illustration" will be browseable for all only after your offer has been placed in "pending" status.

Reason: Not indicated
Qualification documents
Documents folder missing
Documents provided with the proposal
The history of the auction
View auction
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
5 Jan 2022, 13:32
Question's name:
Termenul de depunere a ofertelor
Question:
Ați putea vă rog frumos extinde termenul de depunere a ofertelor. O lună nu este suficientă pentru a pregăti ofertele pentru o licitație atît de complexă. Vă mulțumim anticipat.
Answer (11 Jan 2022, 15:10):
Bună ziua, vă informăm că termenul limită pentru depunerea ofertelor a fost prelungit cu 17 zile, până la data de 21.02.2022, ora 09:30.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
12 Jan 2022, 17:53
Question's name:
3 Requests
Question:
1. Please modify the requirement No. 7 from the list of requirements regarding ISO 14298 so to request it only from the manufacturer of the blankets. We find it discriminatory to request this ISO from all the participants, this way only the manufacturers would be able to participate. 2. Please modify the requirement No. 10 from the list of requirements regarding the intellectual property rights so as to accept not only the participants who have the ownership over those objects, but as well to accept the participants who have the right to use the intellectual property rights under license. 3. Please clarify the meaning of the requirement No. 12. If the participant is not the manufacturer of the equipment, would it be sufficient that the delivery will be carried out by the participant?
Answer (13 Jan 2022, 15:51):
We here inform you that all the requirements specified in point 17 of the Contract Notice were established taking into account the needs of the contracting authority and the reduction of risks when carrying out the tasks entrusted and established in the Statute of the Public Services Agency.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
14 Jan 2022, 12:53
Question's name:
The technical requirements, technical tasks (of confidential nature)
Question:
Please inform about the way the potential bidders can ask questions in regard to The technical requirements, technical tasks (of confidential nature). These questions may relate to the content and/or the understanding of the provisions.
Answer (19 Jan 2022, 13:22):
All clarifications (including those regarding technical specification of confidential nature) are requested according to the provisions of article 35 of Law no. 131/2015 on Public Procurement. All clarifications are published on AIS SRPP (SIA RSAP) (MTender).
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
17 Jan 2022, 17:48
Question's name:
Achiziție
Question:
Reference is being made to the tender document "REQUIREMENTS FOR TRAVEL PASSPORTS' BLANK FORMS PERSONALIZATION EQUIPMENT WITH POLYCARBONATE-TYPE DATA PAGE", clause "2. General requirements for the customization process". The first paragraph mentions technical term "ImagePerf®". Please explain why such requirement is listed as the technical requirements for document blanks do not oversee usage of such technology?
Answer (19 Jan 2022, 16:39):
In Clause 2 of the tender document "REQUIREMENTS FOR TRAVEL PASSPORTS' BLANK FORMS PERSONALIZATION EQUIPMENT WITH POLYCARBONATE-TYPE DATA PAGE" the general requirements for the technologies that the equipment may maintain, but which are not mandatory, are indicated. The mandatory requirements include only the technologies used in the passport personalization process and are indicated/described in the document “Technical requirements of passport” within the public procurement procedure.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
17 Jan 2022, 17:53
Question's name:
pu ambele loturi
Question:
Please confirm that in order to fulfill part 15 of the table in clause "17. Brief description of criteria regarding eligibility of economic operators that can determine their elimination and of selection/pre-selection criteria; the minimum level (s) of requirements eventually imposed; mention the required information (DUAE, documentation) of the "Annex no. 2 to the Standard documentation approved by Order of the Minister of Finance no. 115 as of 15.09.2021", the bidder (or leader of the association/consortium, as the case may be) shall exclusively rely only upon its own personal experience and turnover, i.e. it cannot rely on its parent, subsidiary or otherwise related companies.
Answer (19 Jan 2022, 16:39):
In case of participation of an associated tenderer, the leader of the association in question must meet the requirements of the conditions stipulated in subpoint 15 and/or 16 of point 17 of the Contract Notice.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
18 Jan 2022, 13:48
Question's name:
Electronic auction
Question:
Dear Sirs, Please indicate if an electronic auction will take place for this tender. If so, when and what are the conditions? Thank you.
Answer (19 Jan 2022, 16:41):
According to point 21 of the Contract Notice, the electronic auction is not applied in the public procurement procedure.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
18 Jan 2022, 16:52
Question's name:
General information
Question:
Dear Sirs, Please kindly inform about the following: -How many orders can be expected in one year? Are the mentioned amounts expected to be delivered in one or more shipments per year (there will be one or more orders)? What is the minimum and the maximum quantity of one order? -When is the award decision expected approximately? It is important to know it because of the very long lead-time of the raw materials (paper, cover, chip), we have to indicate our needs to the providers in time. -We would like to kindly ask you to prolong with at least 3 months the lead-time of the orders of this year (2022) due to the significant lack of chip which affects the whole world. Thank you.
Answer (21 Jan 2022, 17:26):
We would like to inform you that the first order is fixed and shall be delivered according to the draft Contract. Subsequently, the annual delivery schedule will be negotiated between the parties, being flexible, but the deliveries shall be made at least twice a year. The minimum quantity for ordering passport blank forms shall be 100,000 pcs., the maximum - 250,000 pcs. The tender award decision shall to be taken in March-April this year. The delivery time has been set based on the needs of the Public Service Agency and cannot be extended.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
18 Jan 2022, 17:00
Question's name:
Passport technical questions
Question:
Dear sirs, Please kindly inform about the following: 1. Would it be possible to recommend that the chip be placed in the cover rather than in the data page? 2. We would like to get information about the thickness of the cover material. 3. Regarding the passport cover: in the technical description one cover color is indicated: burgundy red. Can we expect to produce only 1 type of "ordinary passport"? Do we have to deliver the entire quantity from this one type? 4. In the technical description of the passport’s data page in point 7.1.2.1., there is required a semi-transparent Diffractive Optically Variable Image Device (DOVID). Do we understand correctly that this DOVID element does not have to include metalized parts? (because the metalized parts cannot be laser-engraved) 5. In case of the passport: Does the tactile element have to appear on the data page or on the title page? 6. Inner pages: Does the manufacturer have a free hand in the design, or is there a specific idea for the design of the graphics? Can the variable graphics on page pairs be specified by the manufacturer, or will be there specific customer requirements for the design (e.g., displaying elements that change by page pair in the background)? 7. In the point 11.1.5. e.) the graphic feature printed with iridescent ink is mentioned. Does it refer to the OVI motif, or the iridescent ink motif? Should it be placed on the inner side of the back cover? Could you give us its exact size? Thank you.
Answer (21 Jan 2022, 17:29):
1. A chip placed in the cover is not accepted, according to the Technical specification it shall be in PC (Polycarbonate page) 2. The thickness of the cover is indicated in the Technical specification. 3. According to the technical documentation, the colour must be burgundy red and the deliveries shall be preformed in accordance with the Annual Delivery Schedule. 4. Yes, it shall not include metalized parts. 5. According to point 7.1.2 the Data page and the Title page shall contain a tactile element for blind embossing (roughing). The Data page shall contain an embossed element with tactile effect (3D) that shall be applied during the personalization process. 6. The Public Services Agency has the draft design that shall be finalized with the winner of the public procurement procedure. 7. According to the Technical specification, point 11.1.5e., the graphic feature printed with iridescent ink shall be on the inner side of the cover. The size and design will be finalized with the winner of the public procurement procedure, as it is a design element.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
18 Jan 2022, 17:15
Question's name:
Transport
Question:
Dear Sirs, Please confirm if security transportation is required for the transportation of the documents. Thank you
Answer (21 Jan 2022, 17:31):
The delivery and transport conditions are indicated in the model of the contract published on the AIS RSAP (MTender).
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
18 Jan 2022, 17:18
Question's name:
Demonstrate the qulality of supply of goods
Question:
Dear Sirs, according to point 17.11 of Annex 2, we need to provide at least one confirmation regarding the quality of delivery of goods and or provision of similar services ( for each lot separately.. ) Can we submit a reference letter issued by our customers? Thank you
Answer (21 Jan 2022, 17:32):
According to the Tender documentation, the economic operators are obliged to provide a confirmation for the lot to which the offer is submitted. In case of submitting Tender Offers for both lots, it is sufficient to submit a single confirmation, provided that it refers to both objects of procurement of the 2 lots.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
18 Jan 2022, 20:19
Question's name:
clarifications to the technical requirements of lot 1
Question:
I. Technical specifications of document blank type PA, ST MD 35-37603221-217:2021, general technical requirements, clause 6.6, page 33. It is required that laser perforation must be applied pages 3 to 34, however it is not mentioned that the back cover must also be laser perforated. Please confirm that back cover shall be perforated as well. II. Technical specifications of document blank type PA, ST MD 35-37603221-217:2021, security features, clause 7.1.2.1., page 35. The DOVID is required to be semitransparent. Please explain the term semitransparent. Does it mean that DOVID shall contain metallized elements or does it mean that it shall be of a common yellowish shade? III. Technical specifications of document blank type PA, ST MD 35-37603221-217:2021, security features, clause 7.1.2.1., page 35. Please confirm that raised (tactile 3D) laser engraving feature shall be created during personalization of the data page. IV. Technical specifications of document blank type PA, ST MD 35-37603221-217:2021, the pages of the passport booklet, clause 11.2.1, page 43 and Personalization of data page, clause 12.3.1, page 46. The corresponding clauses state that PC card‘s title page shall include blind embossed tactile feature and that data page shall be personalized with information engraved in MLI. Please confirm that both sides of the PC card shall have surface embossed features. Please clarify whether data side of the PC card shall have more embossed structure elements in addition to MLI, otherwise please confirm that it shall be sufficient for the data side to contain only the MLI structure embossing.
Answer (21 Jan 2022, 17:33):
I. Punching of pages 3-34 – Yes, but punching of the cover – No. II. Yellowish shade. III. Yes. IV. The point 11.2 from Technical Specification ST MD 35-37603221-217:2021 is confirmed. Both sides of the polycarbonate (PC) card contain embossing elements. The side of the card (PC) - the data page contains embossing elements and MLI elements.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
18 Jan 2022, 20:53
Question's name:
contract achizitionarea pasapoarte blanchete policarbonat eng.signed.pdf - increase / decrease in the quantity of the Goods
Question:
In 2.8 the reduction of the annual volume should be compensated in the following year but 2.9 needs clarification: How will be the process be in the last contract year in case of reduction?
Answer (21 Jan 2022, 17:35):
All supplies will be purchased and delivered by the end date of the contract.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
18 Jan 2022, 20:54
Question's name:
contract achizitionarea pasapoarte blanchete policarbonat eng.signed.pdf 2.14 - warranty period
Question:
Re. warranty period for blank docs.: Pls. confirm that warranty period starts with delivery of blank doc.
Answer (21 Jan 2022, 17:36):
We confirm that the warranty period for the blank forms starts to run from the date of their delivery.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
18 Jan 2022, 20:59
Question's name:
contract achizitionarea pasapoarte blanchete policarbonat eng.signed.pdf 2.14 - warranty period
Question:
Re. warranty period for blank docs.: Pls. confirm that warranty period starts with delivery of blank doc.
Answer (21 Jan 2022, 17:37):
The fact that the warranty period for the blank forms starts to run from the date of their delivery is confirmed.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
19 Jan 2022, 07:56
Question's name:
documentatie
Question:
1. In anuntul de participare la pagina 10 sunt scrise cu rosu urmatoarele: “În cazul participării la procedura de achiziție publică a operatorului economic nerezident, acesta este obligat să prezinte documentele justificative recunoscute pe teritoriul Republicii Moldova potrivit cadrului normativ în vigoare (apostilate, legalizate etc., după caz).” Va rugam sa clarificati la ce anume se refera cerinta , ce documente trebuie sa prezinte un operator economic nerezident in Republica Moldova si care este procedura de apostilare si legalizare in Republica Moldova 2. In anuntul de participare, la punctul 12 se solicita urmatoarele: Asigurarea livrării echipamentului de personalizare a blanchetelor de pașapoarte doar de către producătorul acestuia - Declarație pe proprie răspundere. Copia în format electronic de pe documentul pe suport de hârtie cu semnătură olografă fără aplicarea semnăturii electronice sau documentul confirmat prin semnătura electronică a operatorului economic. (semnătura electronică recunoscută pe teritoriul Republicii Moldova) – Va rugam sa confirmati ca cerinta este aplicabila doar pentru Lotul 2. Va rugam totodata sa confirmati ca pentru Lotul 1 nu sunt solicitate servicii de personalizare ci doar livrarea de produse. 3. Va rugam sa acceptati modificarea art .4.4 din modelul de contract Furnizorul este responsabil pentru toate defectele identificate ale bunurilor, ale caror cauze confirmate au existat inainte de a fi livrate cumparatorului si, prin urmare, Furnizorul va fi responsabil pentru toate pierderile directe suportate dupa livrarea acestora Cumparatorului. In Art 4.4 Furnizorul este responsabil pentru toate defectele de fabricatie identificate ale bunurilor, ale caror cauze confirmate au existat inainte de a fi livrate cumparatorului si, prin urmare, Furnizorul va fi responsabil pentru toate pierderile directe suportate dupa livrarea acestora Cumparatorului, limitate la valoarea produsului livrat. 4. La art. 6.1. lit. c din modelul de contract se precizeaza urmatoarele “ În baza prezentului Contract, Furnizorul se obligă:….. c) să asigure condiţiile corespunzătoare pentru recepţionarea Bunurilor de către Cumpărător, în termenele stabilite, în corespundere cu cerinţele prezentului Contract”. Va rugam sa detaliati conditiile pe care trebuie sa le asigure Furnizorul pentru receptionarea bunurilor. 5. La art. 10.3. si 10.4 din modelul de contract - Sanctiuni Furnizorul plateste 0,1%/ zi din suma bunurilor nelivrate, dar nu mai mult de 3 % din valoarea contractului, iar cumparatorul plateste 0,01%/zi din suma neachitata la termen, dar nu mai mult de 0,2% din suma neachitata la timp. Va rugam sa modificati cuantumul penalitatilor astfel incat cuantumul platit de Furnizor - 0,1%/ zi din suma bunurilor nelivrate, dar nu mai mult de 3 % din valoarea contractului sa fie in corespundere cu cunatumul penalitatilor platite de Cumparator.
Answer (21 Jan 2022, 14:54):
1. În conformitate cu prevederile Regulamentului privind aplicarea apostilei aprobat prin Hotărârea Guvernului nr. 163/2007. 2. Se confirmă că cerinţa de la pct. 12 este aplicabila doar pentru Lotul nr. 2. Se confirmă că Lotul nr. 1 prevede doar achiziționarea şi livrarea bunurilor/produselor. 3. Modelul contractului se menține în redacție publicată pe SIA RSAP (MTender). 4. Modelul contractului se menține în redacție publicată pe SIA RSAP (MTender). 5. Modelul contractului se menține în redacție publicată pe SIA RSAP (MTender).
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
19 Jan 2022, 08:57
Question's name:
garantie participare
Question:
Va rugam sa ne comunicati care este valabilitatea Scrisorii de garantie bancara pentru participare cu oferta la procedura de atribuire a contractului de achizitie publica.
Answer (21 Jan 2022, 14:56):
Conform pct. 28 din Anunțul de participare, termenul de valabilitate al ofertelor constituie 180 zile, respectiv scrisoarea de garanție bancară pentru ofertă urmează să fie valabilă 180 zile din momentul termenului limită de depunere a ofertelor.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
19 Jan 2022, 09:07
Question's name:
lot 1
Question:
Avand in vedere cerinta exprimata in caietele de sarcini cu privire la toleranta dintre marginea documentelor si desenul imprimat, toleranta mai mica decat cea prevazuta, de exemplu, de standardul ICAO -0,75 mm pentru dimensiunea fizica a unui pasaport (DOC 9303, partea 4, capitolul 2, sectiunea 2.2) - va rugam sa fiti de acord cu majorarea acestui parametru. In fapt, acest parametru este important pentru potrivirea datelor personalizate cu desenul imprimat. Bunele practici in domeniu includ variante alternative mult mai eficiente pentru a realiza o potrivire mai buna, cum ar fi utilizarea unui sistem de citire automata a unui semn imprimat sau personalizarea blocului de date personale odata cu denumirea campurilor.
Answer (21 Jan 2022, 14:57):
Toleranța conform Sarcinii tehnice și ICAO.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
21 Jan 2022, 20:15
Question's name:
1 Technical requirements for software interaction during the production of documents of the National Passport System of the Republic of Moldova (file "Cerinte sistem informational de personalizare (ENG) + Anexa.pdf") in connection with Techn. spec. for ID card (ID1; file name "ST_MD_35_37603221_204_2021_ID_CA.pdf"), Technical Specifications, Annex no. 22 of standard documentation, Price Specifications, Annex no. 23 of standard documentation and Contract for Blanks of identity documents of the National Passport System, driving licenses and registration certificates, annexes 2 and 3 (file name "contract achizitionarea pasapoarte blanchete policarbonat eng.signed.pdf") eID vs. ID In the "Technical requirements for software interaction during the production of documents of the National Passport System of the Republic of Moldova", on page 4 a table is given with all document types which are scope of supply of Lot 1. Here, it is mentioned that there shall be an ID card without chip (CA) and with chip (e-CA). However, in all other tender documents, at the relevant places, only "CA" is given and "e-CA" is missing, eg in the technical specifications only a document for CA is provided and none for e-CA. Also, in the price specifications (annex 2) and the delivery plan (annex 3) of the contract for Lot 1, only CA is mentioned and not e-CA. That is why we kindly would like to ask you to provide at least - a specification for chip and operating system for e-CA complementing the spec. for CA (assuming that all requirements for CA are applicable for e-CA, too). - a delivery plan with quantities for e-CA - a quantity split between CA and e-CA - Modify Annexes 22 and 23 of Standard Documentation to consider e-CA
Question:
1 Technical requirements for software interaction during the production of documents of the National Passport System of the Republic of Moldova (file "Cerinte sistem informational de personalizare (ENG) + Anexa.pdf") in connection with Techn. spec. for ID card (ID1; file name "ST_MD_35_37603221_204_2021_ID_CA.pdf"), Technical Specifications, Annex no. 22 of standard documentation, Price Specifications, Annex no. 23 of standard documentation and Contract for Blanks of identity documents of the National Passport System, driving licenses and registration certificates, annexes 2 and 3 (file name "contract achizitionarea pasapoarte blanchete policarbonat eng.signed.pdf") eID vs. ID In the "Technical requirements for software interaction during the production of documents of the National Passport System of the Republic of Moldova", on page 4 a table is given with all document types which are scope of supply of Lot 1. Here, it is mentioned that there shall be an ID card without chip (CA) and with chip (e-CA). However, in all other tender documents, at the relevant places, only "CA" is given and "e-CA" is missing, eg in the technical specifications only a document for CA is provided and none for e-CA. Also, in the price specifications (annex 2) and the delivery plan (annex 3) of the contract for Lot 1, only CA is mentioned and not e-CA. That is why we kindly would like to ask you to provide at least - a specification for chip and operating system for e-CA complementing the spec. for CA (assuming that all requirements for CA are applicable for e-CA, too). - a delivery plan with quantities for e-CA - a quantity split between CA and e-CA - Modify Annexes 22 and 23 of Standard Documentation to consider e-CA
Answer (24 Jan 2022, 16:36):
Vă informăm că, potrivit art. 35 alin. (1) lit. a) din Legea nr. 131/2015 privind achizițiile publice, termenul de solicitare a clarificărilor se calculează de la data publicării documentației de atribuire și a constituit în cazul dat 9 zile. Astfel, termenul de solicitare a clarificărilor a expirat la data de 19.01.2022, ora 09:30.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
21 Jan 2022, 20:16
Question's name:
File "0001.0012-00.CT.01.05.pdf" - Techn. Spec. for Perso. System for ID3 Docs., section 2 of Technical Requirements
Question:
Please confirm that the four security features "touch laser engraving", MLI, SLI and ImagePerf are only meant as examples or options. To comply with the requirement fully, it is sufficient to provide at least one of the four features or an equivalent. If it was the case that all four features are mandatory, this may be interpreted as a discriminatory requirement because Stereo Laser Image (SLI) is patented by only by one specific provider. Unless CA have an agreement with the IPR holder to ensure parity quoting for all bidders. Furthermore, please note that if ImagePerf becomes a mandatory requirement, this will not be realizable anymore with desktop personalization machines but only with significantly larger machines and the cost of which is significantly higher than desktop personalization machines. Also, securing a passport's data page with all four features at the same time is exaggerated and to some degree redundant.
Answer (24 Jan 2022, 16:36):
Vă informăm că, potrivit art. 35 alin. (1) lit. a) din Legea nr. 131/2015 privind achizițiile publice, termenul de solicitare a clarificărilor se calculează de la data publicării documentației de atribuire și a constituit în cazul dat 9 zile. Astfel, termenul de solicitare a clarificărilor a expirat la data de 19.01.2022, ora 09:30.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
21 Jan 2022, 20:18
Question's name:
3 Technical Specification of Passport with polycarbonate data page (file name "ST MD 35-37603221-217_2021.pdf"), section 7.1.2 Security Features, page 38: 7.1.2.1 The data page shall be protected with […] - raised (tactile 3D) laser engraving feature. raised (tactile 3D) Please confirm that provision of any tactile laser engraving (e.g. numbers or letters) during personalization will be fully compliant with this requirement. If not, please note that another interpretation of this requirement would make it a discriminatory requirement especially in connection with point 12.5b) of the Technical Specification of Passport with polycarbonate data page (file name ""ST MD 35-37603221-217_2021.pdf"") as such a requirement could be complied with only by using Stereo Laser Image (SLI) patented by only by one specific provider, unless the Contracting Authority have an agreement with the Intellectual Property Rights holder to ensure parity quoting for all bidders. If the Contracting Authority has a sort of agreement with Idemia, as patent holder for SLI, that they have to offer this to any bidder in the MDA tender on the same terms & conditions as for themselves, then it would still be a fair competition.
Question:
3 Technical Specification of Passport with polycarbonate data page (file name "ST MD 35-37603221-217_2021.pdf"), section 7.1.2 Security Features, page 38: 7.1.2.1 The data page shall be protected with […] - raised (tactile 3D) laser engraving feature. raised (tactile 3D) Please confirm that provision of any tactile laser engraving (e.g. numbers or letters) during personalization will be fully compliant with this requirement. If not, please note that another interpretation of this requirement would make it a discriminatory requirement especially in connection with point 12.5b) of the Technical Specification of Passport with polycarbonate data page (file name ""ST MD 35-37603221-217_2021.pdf"") as such a requirement could be complied with only by using Stereo Laser Image (SLI) patented by only by one specific provider, unless the Contracting Authority have an agreement with the Intellectual Property Rights holder to ensure parity quoting for all bidders. If the Contracting Authority has a sort of agreement with Idemia, as patent holder for SLI, that they have to offer this to any bidder in the MDA tender on the same terms & conditions as for themselves, then it would still be a fair competition.
Answer (24 Jan 2022, 16:36):
Vă informăm că, potrivit art. 35 alin. (1) lit. a) din Legea nr. 131/2015 privind achizițiile publice, termenul de solicitare a clarificărilor se calculează de la data publicării documentației de atribuire și a constituit în cazul dat 9 zile. Astfel, termenul de solicitare a clarificărilor a expirat la data de 19.01.2022, ora 09:30.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
21 Jan 2022, 20:20
Question's name:
Cerinte sistem informational de personalizare (ENG) + Anexa.pdf Page 23 4.1.1
Question:
Is there a printer for pin letters and envelops or shall it be offered by the bidder?
Answer (24 Jan 2022, 16:37):
Vă informăm că, potrivit art. 35 alin. (1) lit. a) din Legea nr. 131/2015 privind achizițiile publice, termenul de solicitare a clarificărilor se calculează de la data publicării documentației de atribuire și a constituit în cazul dat 9 zile. Astfel, termenul de solicitare a clarificărilor a expirat la data de 19.01.2022, ora 09:30.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
21 Jan 2022, 20:20
Question's name:
Technical Specification of Passport with polycarbonate data page (file name "ST MD 35-37603221-217_2021.pdf")
Question:
Can you please confirm that the 5 passport types the contracting authority needs (PD, PS, PC, PT, PH ) a paper data page has to be personalized by the Diletta 800i and laminated by the a laminator which the contracting authority has? If this is wrong, please explain which types of passports will have a paper data page. Please provide in any case the total quantities and a delivery plan for each of the passport types with the paper data page.
Answer (24 Jan 2022, 16:37):
Vă informăm că, potrivit art. 35 alin. (1) lit. a) din Legea nr. 131/2015 privind achizițiile publice, termenul de solicitare a clarificărilor se calculează de la data publicării documentației de atribuire și a constituit în cazul dat 9 zile. Astfel, termenul de solicitare a clarificărilor a expirat la data de 19.01.2022, ora 09:30.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
21 Jan 2022, 20:21
Question's name:
2.4.5 (b) page 12: Advanced qualified electronic signature and (MSign) authentication.
Question:
Can we assume that the existing trust center will deliver signature certificates that comply with all regulations for "Advanced qualified electronic signature" certificates in Moldova?
Answer (24 Jan 2022, 16:37):
Vă informăm că, potrivit art. 35 alin. (1) lit. a) din Legea nr. 131/2015 privind achizițiile publice, termenul de solicitare a clarificărilor se calculează de la data publicării documentației de atribuire și a constituit în cazul dat 9 zile. Astfel, termenul de solicitare a clarificărilor a expirat la data de 19.01.2022, ora 09:30.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
21 Jan 2022, 20:22
Question's name:
2.4.5 (b) page 12: Advanced qualified electronic signature and (MSign) authentication.
Question:
We suppose that the citizen shall be able to use the signature and authentication certificate at home on his/her private PC. For this purpose a PKI middleware is required. Shall the middleware software and the corresponding licenses for the citizens of Moldova be included in the offer?
Answer (24 Jan 2022, 16:37):
Vă informăm că, potrivit art. 35 alin. (1) lit. a) din Legea nr. 131/2015 privind achizițiile publice, termenul de solicitare a clarificărilor se calculează de la data publicării documentației de atribuire și a constituit în cazul dat 9 zile. Astfel, termenul de solicitare a clarificărilor a expirat la data de 19.01.2022, ora 09:30.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
21 Jan 2022, 20:23
Question's name:
2.4.4. BAC and EAC PKI
Question:
Please confirm our understanding that BAC and EAC PKI already exist and that only the appropriate interface from the Personalization System to these PKI systems needs to be offered.
Answer (24 Jan 2022, 16:37):
Vă informăm că, potrivit art. 35 alin. (1) lit. a) din Legea nr. 131/2015 privind achizițiile publice, termenul de solicitare a clarificărilor se calculează de la data publicării documentației de atribuire și a constituit în cazul dat 9 zile. Astfel, termenul de solicitare a clarificărilor a expirat la data de 19.01.2022, ora 09:30.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
21 Jan 2022, 20:24
Question's name:
2.4.4. BAC and EAC PKI
Question:
Please confirm that CA will support PKI and certificate management system and that this is not scope of this tender.
Answer (24 Jan 2022, 16:37):
Vă informăm că, potrivit art. 35 alin. (1) lit. a) din Legea nr. 131/2015 privind achizițiile publice, termenul de solicitare a clarificărilor se calculează de la data publicării documentației de atribuire și a constituit în cazul dat 9 zile. Astfel, termenul de solicitare a clarificărilor a expirat la data de 19.01.2022, ora 09:30.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
21 Jan 2022, 20:25
Question's name:
Technical Specification of Passport with polycarbonate data page (file name "ST MD 35-37603221-217_2021.pdf") and Techn. spec. for ID card (ID1; file name "ST_MD_35_37603221_204_2021_ID_CA.pdf")
Question:
9 Technical Specification of Passport with polycarbonate data page (file name "ST MD 35-37603221-217_2021.pdf") and Techn. spec. for ID card (ID1; file name "ST_MD_35_37603221_204_2021_ID_CA.pdf") Q&A The quality control procedure shall be performed at the automated workplace of the operator of the Technical Control Section. Should we assume a Q&A station is needed per each SCP 60 Machine? So, at least 2 per machine, i.e. 10 in total as a minimum?
Answer (24 Jan 2022, 16:37):
Vă informăm că, potrivit art. 35 alin. (1) lit. a) din Legea nr. 131/2015 privind achizițiile publice, termenul de solicitare a clarificărilor se calculează de la data publicării documentației de atribuire și a constituit în cazul dat 9 zile. Astfel, termenul de solicitare a clarificărilor a expirat la data de 19.01.2022, ora 09:30.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
21 Jan 2022, 20:26
Question's name:
REQUIREMENTS FOR THE PERSONALIZATION INFORMATION SYSTEM for Identity Documents of the National Passport System, Driving Licenses and Registration Certificates (file name "Cerinte sistem informational de personalizare (ENG) + Anexa.pdf"), section 2.6 Requirements for scalability and recovery (page 14)
Question:
Please confirm that CA is requesting personalization to take place at one central site only instead of a decentral concept with several personalization sites distributed over the country. If so, please confirm that any disaster recovery plan shall consider establishing alternative means of operation at the one and the same site.
Answer (24 Jan 2022, 16:38):
Vă informăm că, potrivit art. 35 alin. (1) lit. a) din Legea nr. 131/2015 privind achizițiile publice, termenul de solicitare a clarificărilor se calculează de la data publicării documentației de atribuire și a constituit în cazul dat 9 zile. Astfel, termenul de solicitare a clarificărilor a expirat la data de 19.01.2022, ora 09:30.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
21 Jan 2022, 20:26
Question's name:
Technical Specification of Passport with polycarbonate data page (file name "ST MD 35-37603221-217_2021.pdf") and Techn. spec. for ID card (ID1; file name "ST_MD_35_37603221_204_2021_ID_CA.pdf")
Question:
Re. Design / Artwork of the Blank Documents: Will this be provided by the Contracting Authority?
Answer (24 Jan 2022, 16:38):
Vă informăm că, potrivit art. 35 alin. (1) lit. a) din Legea nr. 131/2015 privind achizițiile publice, termenul de solicitare a clarificărilor se calculează de la data publicării documentației de atribuire și a constituit în cazul dat 9 zile. Astfel, termenul de solicitare a clarificărilor a expirat la data de 19.01.2022, ora 09:30.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
21 Jan 2022, 20:27
Question's name:
REQUIREMENTS FOR THE PERSONALIZATION INFORMATION SYSTEM for Identity Documents of the National Passport System, Driving Licenses and Registration Certificates (file name "Cerinte sistem informational de personalizare (ENG) + Anexa.pdf"), section 2.8 Requirements for the system maintenance (page 17)
Question:
To ensure the requested service lead times (SLAs) as given in section 2.8.3, it is required to have remote access to the personalization system for the Contractor. Please confirm that the Contracting Authority will allow and provide such remote system access for monitoring purposes while keeping all relevant state of the art security precautions.
Answer (24 Jan 2022, 16:39):
Vă informăm că, potrivit art. 35 alin. (1) lit. a) din Legea nr. 131/2015 privind achizițiile publice, termenul de solicitare a clarificărilor se calculează de la data publicării documentației de atribuire și a constituit în cazul dat 9 zile. Astfel, termenul de solicitare a clarificărilor a expirat la data de 19.01.2022, ora 09:30.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
21 Jan 2022, 20:28
Question's name:
13 REQUIREMENTS FOR THE PERSONALIZATION INFORMATION SYSTEM for Identity Documents of the National Passport System, Driving Licenses and Registration Certificates (file name "Cerinte sistem informational de personalizare (ENG) + Anexa.pdf"), sections 2.3.2 and 2.3.4 (page 10) Perso machines We understand that you will provide the personalization machines mentioned explicitly in sections 2.3.2 and 2.3.4 of the technical specification referred to. In this connection, please confirm that you will ensure all required data for Software integration of the said machines will be provided to the successful bidder. Also, please confirm that you will provide maintenance, spare parts, consumables, etc. for the said machines without the successful bidder being involved.
Question:
We understand that you will provide the personalization machines mentioned explicitly in sections 2.3.2 and 2.3.4 of the technical specification referred to. In this connection, please confirm that you will ensure all required data for Software integration of the said machines will be provided to the successful bidder. Also, please confirm that you will provide maintenance, spare parts, consumables, etc. for the said machines without the successful bidder being involved.
Answer (24 Jan 2022, 16:39):
Vă informăm că, potrivit art. 35 alin. (1) lit. a) din Legea nr. 131/2015 privind achizițiile publice, termenul de solicitare a clarificărilor se calculează de la data publicării documentației de atribuire și a constituit în cazul dat 9 zile. Astfel, termenul de solicitare a clarificărilor a expirat la data de 19.01.2022, ora 09:30.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
21 Jan 2022, 20:28
Question's name:
"REQUIREMENTS FOR THE PERSONALIZATION INFORMATION SYSTEM for Identity Documents of the National Passport System, Driving Licenses and Registration Certificates (file name ""Cerinte sistem informational de personalizare (ENG) + Anexa.pdf""), sections 2.3.2 and 2.3.4 (page 10)"
Question:
If the Contracting Authority will provide the personalization machines mentioned explicitly in sections 2.3.2 and 2.3.4 of the technical specification referred to, it would be important for any bidder to evaluate the status of the machines with our own eyes, get information like year of manufacturing, delivery, life time, production environment, etc. For this purpose we kindly ask for permission of a site visit at the earliest convenience of Contracting Authority considering the short time frame until bid submission."
Answer (24 Jan 2022, 16:39):
Vă informăm că, potrivit art. 35 alin. (1) lit. a) din Legea nr. 131/2015 privind achizițiile publice, termenul de solicitare a clarificărilor se calculează de la data publicării documentației de atribuire și a constituit în cazul dat 9 zile. Astfel, termenul de solicitare a clarificărilor a expirat la data de 19.01.2022, ora 09:30.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
21 Jan 2022, 20:55
Question's name:
Technical requirements for software interaction during the production of documents of the National Passport System of the Republic of Moldova (file "Cerinte sistem informational de personalizare (ENG) + Anexa.pdf") in connection with Techn. spec. for ID card (ID1; file name "ST_MD_35_37603221_204_2021_ID_CA.pdf"), Technical Specifications, Annex no. 22 of standard documentation, Price Specifications, Annex no. 23 of standard documentation and Contract for Blanks of identity documents of the National Passport System, driving licenses and registration certificates, annexes 2 and 3 (file name "contract achizitionarea pasapoarte blanchete policarbonat eng.signed.pdf")
Question:
In the "Technical requirements for software interaction during the production of documents of the National Passport System of the Republic of Moldova", on page 4 a table is given with all document types which are scope of supply of Lot 1. Here, it is mentioned that there shall be an ID card without chip (CA) and with chip (e-CA). However, in all other tender documents, at the relevant places, only "CA" is given and "e-CA" is missing, eg in the technical specifications only a document for CA is provided and none for e-CA. Also, in the price specifications (annex 2) and the delivery plan (annex 3) of the contract for Lot 1, only CA is mentioned and not e-CA. That is why we kindly would like to ask you to provide at least - a specification for chip and operating system for e-CA complementing the spec. for CA (assuming that all requirements for CA are applicable for e-CA, too). - a delivery plan with quantities for e-CA - a quantity split between CA and e-CA - Modify Annexes 22 and 23 of Standard Documentation to consider e-CA
Answer (24 Jan 2022, 16:44):
Vă informăm că, potrivit art. 35 alin. (1) lit. a) din Legea nr. 131/2015 privind achizițiile publice, termenul de solicitare a clarificărilor se calculează de la data publicării documentației de atribuire și a constituit în cazul dat 9 zile. Astfel, termenul de solicitare a clarificărilor a expirat la data de 19.01.2022, ora 09:30.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
22 Jan 2022, 16:38
Question's name:
Annex no. 23 to Standard Documentation in connection with Contract for Specialized equipment and program product for personalization of identity documents from the National passport system, driving licenses and registration certificates (CPV code: 22520000-1) and Contract for Blanks of identity documents of the National Passport System, driving licenses and registration certificates (CPV Code: 22400000-4), section 3
Question:
Please confirm that the prices in Annex 23 may be quoted in Euro currency.
Answer (24 Jan 2022, 16:44):
Vă informăm că, potrivit art. 35 alin. (1) lit. a) din Legea nr. 131/2015 privind achizițiile publice, termenul de solicitare a clarificărilor se calculează de la data publicării documentației de atribuire și a constituit în cazul dat 9 zile. Astfel, termenul de solicitare a clarificărilor a expirat la data de 19.01.2022, ora 09:30.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
24 Jan 2022, 18:53
Question's name:
Deadline for bidder queries
Question:
As some bidder questions which have been submitted in time until the original deadline of Jan. 19, 2022, 9:30am have not been answered until the deadline, the tender procedure was suspended until CA has answered all questions. In the following, the tender procedure continued with new deadlines for questions as well as for bid submission considering the time period of suspension. All this in accordance with art. 35 of the Law No. 131/2015 on public procurement from the Rep. of Moldova. Therefore, the 2nd deadline for submitting questions was 23.01.2022, 17:45. All the above questions which were not responded by explaining that they have been submitted too late compared to the original deadline, have been submitted in time for the 2nd deadline. That is why we kindly ask you to give proper and relevant responses to all these questions. Even more so, as currently the deadline for submission of questions has been extended again to Jan. 26, 16:45.
Answer (26 Jan 2022, 15:25):
Vă informăm că, potrivit art. 35 alin. (1) lit. a) din Legea nr. 131/2015 privind achizițiile publice, termenul de solicitare a clarificărilor se calculează de la data publicării documentației de atribuire și a constituit în cazul dat 9 zile. Astfel, termenul de solicitare a clarificărilor a expirat la data de 19.01.2022, ora 09:30.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
25 Jan 2022, 14:10
Question's name:
Administrative documents
Question:
Good afternoon, Please kindly inform, in case of using a subcontractor, which documents/appendixes need to be submitted by the subcontractor. Thank you
Answer (26 Jan 2022, 15:26):
Vă informăm că, potrivit art. 35 alin. (1) lit. a) din Legea nr. 131/2015 privind achizițiile publice, termenul de solicitare a clarificărilor se calculează de la data publicării documentației de atribuire și a constituit în cazul dat 9 zile. Astfel, termenul de solicitare a clarificărilor a expirat la data de 19.01.2022, ora 09:30.
Lotul nr. 1 Blanchete de acte de identitate din sistemul național de pașapoarte, permise de conducere și certificate de înmatriculare
Date:
26 Jan 2022, 15:37
Question's name:
Call for applications, Annex no. 2 to the Standard documentation, section 24 in connection with Contract for Blanks of identity documents of the National Passport System, driving licenses and registration certificates, section 3
Question:
In case the offer of the awarded bidder is in EURO, could you please communicate the source for the exchange rate EUR / lei MDL mentioned in section 3 of the contract, so that the bidder can consider it? In this connection, could you please confirm that the price given in the contract in EURO remains fix over the whole contract period?
Answer (26 Jan 2022, 15:39):
Vă informăm că, potrivit art. 35 alin. (1) lit. a) din Legea nr. 131/2015 privind achizițiile publice, termenul de solicitare a clarificărilor se calculează de la data publicării documentației de atribuire și a constituit în cazul dat 9 zile. Astfel, termenul de solicitare a clarificărilor a expirat la data de 19.01.2022, ora 09:30.
Unfortunately, questions can be asked only during the "Active" period.
Clarifications